The line for the production of reinforcing profiles
Application:
The machine is designed for reinforcing profiles (reinforced-plastic systems amplifiers) manufacturing. These profiles are used for glazing for buildings, plastic (PVC) windows, doors (Aluplast, KBE, Pimapen, Gealan, Kömmerling, REHAU, Salamander, Schuco, VEKA, Trocal analogues, etc.) production.
View the embedded image gallery online at:
https://www.everkon.com/en/production/the-line-for-the-production-of-reinforcing-profiles#sigProGalleria148193d6e9
https://www.everkon.com/en/production/the-line-for-the-production-of-reinforcing-profiles#sigProGalleria148193d6e9
Line Composition
Basic components
|
| Raw Material | Parameters |
| - Galvanized steel in accordance with GOST 14918-80. | |
| coil width | 210 mm |
| coil OD | 600...1300 mm |
| coil ID | 500...600 mm |
| coil weight (max) | 10 000 kg |
| Operating Conditions | Parameters |
| A/C net | 380v, 50 Hz |
| Temperature | +5...+45 C |
| Lifting equipment | 2000 kg |
| Operation personnel | 2 People |
+38 (05746) 42-388
This email address is being protected from spambots. You need JavaScript enabled to view it.