Equipment (machine) for metal roofing sheets

Tile effect production line

Application:

The machine is used in steel cold-formed sheet profiles production - metal roofing sheets. These profiles differ in the optimal distribution of the metal by section, in high stiffness and good surface quality. They are widely used in finishing walls, roofs and buildings with the protective-decorating coating.

View the embedded image gallery online at:
https://www.everkon.com/en/production/tile-effect-production-line#sigProGalleriaec5e0d3dab

Line Composition

Basic components

  • Uncoiler
  • Roll-forming section
  • Hydraulic pressing unit
  • Cut-to-length unit
  • Receiving table
  • Control system

Options

  • Coil feeding car
Raw Material Parameters
- Galvanized steel coils.  
coil width1250 mm
coil OD600-1300 mm
coil ID500-600 mm
coil weight (max)10 000 kg
Operating Conditions Parameters
A/C net380v, 50Hz
Compressed air net8...10 Bar
Temperature+5...+45 C
Lifting equipment10 000 kg
Operation personnel2 People
Monday, 24 April 2017 10:04
Published in Production
back to top
ua-flag viberViberwhatsappWhatsApp+38 (068) 888-00-55 stat_ph+38 (05746) 42-388 +38 (05746) 42-389 ru-flag stat_ph+7 (916) 599-89-42 mail This email address is being protected from spambots. You need JavaScript enabled to view it.